• ChargePapa Smart-Link | CCS2 to CHAdeMO Adapter 250A (Active Protocol Converter / CE)
  • 深色科技海报
  • CCS2 to CHAdeMO - Outdoor Table Scene
  • ChargePapa Smart-Link | CCS2 to CHAdeMO Adapter 250A (Active Protocol Converter / CE)
  • 白底极简海报
  • 全球物流场景图
1 6

ChargePapa Smart-Link | CCS2 to CHAdeMO Adapter 250A (Active Protocol Converter / CE)

On sale Save $145.00 USD (11% off)
$1,158.55 USD
$1,303.55 USD $1,158.55 USD
Sale Sold out
Shipping calculated at checkout.
🛡️ Quality Assurance: Every unit undergoes a rigorous 72-hour high-voltage stress test and thermal calibration before dispatch from our global hub. Safety is our priority; quality is non-negotiable.
✅ CE/TUV Safety Certified
🛡️ 2-Year Replacement Warranty
📦 Free Global Shipping

Future-Proof Your CHAdeMO EV.
Access CCS2 Networks. 250A / 100kW Active Conversion.

Finding CHAdeMO stations is getting harder. The ChargePapa Smart-Link (SKU: CPCADA0008) solves this problem. This active adapter enables your Nissan Leaf, Kia Soul EV, or Mitsubishi Outlander PHEV to charge at modern CCS2 (IEC 62196-3) DC fast charging stations. Built with a dedicated active processor that translates CCS2 PLC protocols to CHAdeMO CAN Bus signals in real-time. Rated at 250A to fully support CHAdeMO 1.2 (up to 100kW), with backward compatibility for CHAdeMO 1.0 vehicles. CE certified and IP54 rated.

🔄 Active Protocol Conversion

Input: CCS2

From CCS2 (IEC 62196-3) Charging Station

Output: CHAdeMO

To CHAdeMO-port Vehicle (e.g. Nissan Leaf)

⚡ Active conversion: Unlike passive adapters, the Smart-Link actively translates PLC (CCS2 station protocol) ↔ CAN Bus (CHAdeMO vehicle protocol) in real-time, enabling full handshake and authentication with modern CCS2 chargers. Rated 250A to fully support CHAdeMO 1.2 vehicles at up to 100kW.
Engineering Data Sheet
SKU CPCADA0008
Input Connector (Charger Side) CCS2 (IEC 62196-3)
Output Connector (Vehicle Side) CHAdeMO
Adapter Rated Current 250A MAX
Input Voltage Range 100V – 500V DC
Max Power (CHAdeMO 1.2) 100kW (200A × 500V)
Max Power (CHAdeMO 1.0) 62.5kW (125A × 500V) — vehicle limited
CHAdeMO Protocol Support CHAdeMO 1.0 / 1.2
Communication Protocol Active PLC ↔ CAN Bus
Firmware Update USB-C Port
Ingress Protection IP54
Power Source Grid Powered (No Battery)
Certifications CE (Conformité Européenne)
Vehicle Compatibility
Make Model Year CHAdeMO Ver.
Nissan Leaf ZE0 2011–2017 1.0 (50kW / 125A)
Nissan Leaf ZE1, e-NV200 2018–2022 1.2 (up to 100kW / 200A)
Kia Soul EV 2014–2019 1.0 (up to 50kW)
Mitsubishi Outlander PHEV, i-MiEV 2012–2021 1.0 (up to 50kW)
Peugeot Partner Electric, iOn — 1.0
Citroën Berlingo Electric, C-Zero — 1.0
⚠️ CHAdeMO-port vehicles only. Actual charging speed is determined by your vehicle’s CHAdeMO version — CHAdeMO 1.0 vehicles are limited to 62.5kW max; CHAdeMO 1.2 vehicles can charge at up to 100kW. Not compatible with CCS1, CCS2, Tesla NACS (SAE J3400), or GB/T port vehicles.
Frequently Asked Questions

Q: Is the CPCADA0008 compatible with my Nissan Leaf, Kia Soul EV, or Mitsubishi Outlander PHEV?

A: Yes. The ChargePapa Smart-Link CPCADA0008 is compatible with all vehicles equipped with a CHAdeMO DC fast charging port, including the Nissan Leaf ZE0 (2011–2017), Nissan Leaf ZE1 (2018–2022), Nissan e-NV200, Kia Soul EV (2014–2019), Mitsubishi Outlander PHEV (2012–2021), Mitsubishi i-MiEV, Peugeot Partner Electric, and Citroën Berlingo Electric. It supports up to 250A input from CCS2 (IEC 62196-3 — International Electrotechnical Commission Combo 2) charging stations, fully covering CHAdeMO 1.2 vehicles at up to 100kW.

Q: What is the maximum charging speed with the ChargePapa Smart-Link CPCADA0008?

A: The ChargePapa Smart-Link CPCADA0008 is rated at 250A and fully supports CHAdeMO 1.2 (200A × 500V = 100kW maximum). For CHAdeMO 1.0 vehicles such as the Nissan Leaf ZE0 and Kia Soul EV, charging is limited to 62.5kW (125A × 500V) by the vehicle’s onboard charger. Actual speed depends on both the vehicle’s CHAdeMO version and the CCS2 station’s rated output.

Q: How does the CPCADA0008 compare to a standard passive CCS2-to-CHAdeMO adapter?

A: Compared to standard passive CCS2-to-CHAdeMO adapters, the ChargePapa Smart-Link CPCADA0008 features an active protocol converter that translates PLC (IEC 62196-3 CCS2 communication standard) to CAN Bus (CHAdeMO vehicle communication standard) in real-time. Passive adapters cannot perform this handshake and will fail to initiate charging on modern CCS2 stations. The Smart-Link is rated at 250A — sufficient to support CHAdeMO 1.2 at full 100kW — and includes USB-C firmware upgradability for long-term compatibility.

Q: Is the CPCADA0008 compatible with the Tesla Cybertruck or other Tesla vehicles?

A: No. The ChargePapa Smart-Link CPCADA0008 outputs to CHAdeMO and is not compatible with the Tesla Cybertruck, Model S, Model 3, Model X, or Model Y. Tesla vehicles in North America use the NACS (SAE J3400 — Society of Automotive Engineers J3400) connector, and Tesla vehicles in Europe use CCS2 (IEC 62196-3) — neither of which is a CHAdeMO port. This adapter is for CHAdeMO-port vehicles only.

Q: Has the CPCADA0008 passed CE certification, and what does IP54 mean?

A: Yes. The ChargePapa Smart-Link CPCADA0008 carries CE (Conformité Européenne) certification, confirming compliance with European Union health, safety, and environmental protection directives. IP54 means the adapter is protected against dust ingress and water splashing from any direction — per IEC 60529 (International Electrotechnical Commission ingress protection standard) — making it suitable for outdoor charging in typical weather conditions.

Q: What is the SKU, and which CHAdeMO versions does the Smart-Link CPCADA0008 support?

A: The SKU is CPCADA0008. The ChargePapa Smart-Link accepts CCS2 (IEC 62196-3 — International Electrotechnical Commission Combined Charging System Combo 2) on the charger input side, and outputs to CHAdeMO on the vehicle side. It supports CHAdeMO 1.0 (up to 62.5kW) and CHAdeMO 1.2 (up to 100kW / 200A). The adapter is rated at 250A to provide headroom above the CHAdeMO 1.2 maximum. CE certified and IP54 rated. Firmware upgradeable via USB-C port.

✅ Standards & Certifications

  • CE (Conformité Européenne) — Confirms compliance with European Union health, safety, and environmental protection directives.
  • IP54 — IEC 60529 — International Electrotechnical Commission ingress protection standard. Protected against dust and water splashing from any direction.
  • IEC 62196-3 — International Electrotechnical Commission standard for CCS2 (Combo 2) DC fast charging connectors.
  • CHAdeMO 1.0 / 1.2 — DC fast charging standard developed by the CHAdeMO Association. Version 1.0: up to 62.5kW (125A × 500V). Version 1.2: up to 100kW (200A × 500V).

⚠️ Critical Usage Note

This adapter is designed for CHAdeMO-port vehicles only. Do not use with CCS1 (SAE J1772 Combo), CCS2 (IEC 62196-3), Tesla NACS (SAE J3400), or GB/T port vehicles. Do not exceed rated operating limits (500V DC / 250A). Actual charging speed is determined by your vehicle’s CHAdeMO version. Inspect before each use — do not use if housing is cracked or contacts are damaged. Ensure connectors are fully seated before initiating a charging session. Powered directly by the charging station — no internal battery.

Warranty & Assurance

2-Year Comprehensive Warranty.
We cover all internal component failures. If a fault occurs, we provide remote diagnosis and free replacement units or parts. No return shipping required for confirmed defects.

Shipping & Lead Time

Factory Direct Shipping.
• Processing (QC): 3-5 Business Days
• Global Transit: 8-20 Business Days
• Tracking provided via email upon dispatch.

Global Shipping & Fulfillment

Shipped Direct: Estimated timelines vary by product type.

Total turnaround may vary because product categories have different warehouse stock levels, quality-control procedures, and dispatch preparation cycles before shipment.

Adapters & Accessories

12-22 Business Days

Handling 4-7 business days + transit 8-15 business days.

Portable, Home & DC Chargers

15-29 Business Days

Handling 7-14 business days + transit 8-15 business days.

🏭 The Direct Process

To ensure safety and performance, ChargePapa products go through inspection, preparation, and dispatch coordination before shipment. Different product types may require different warehouse allocation and quality-control turnaround before release.

PART 1 Estimated Handling Time Before Dispatch

Tier 1

Adapters & Accessories

4-7 Business Days

For charging adapters, connector accessories, and related small parts. This handling window remains unchanged.

Tier 2

Portable Chargers, Home Chargers & DC Chargers

7-14 Business Days

For portable EV chargers, home charging stations, and DC charger models including DC SVC-TG and DC EVC-ZG. Additional preparation time is required before dispatch.

PART 2 Transit Time (8-15 Days)

Global Transport

8-15 Days

International transport via Air Freight, Sea Freight, or Land depending on destination and local delivery conditions.

Estimated Timeline by Product Type

Longer total timelines do not mean inactive processing. They reflect differences in stock allocation, warehouse readiness, product inspection workload, and dispatch turnover by category.

Product Type Handling Time Transit Time Estimated Total
Adapters & Accessories 4-7 business days 8-15 business days 12-22 business days
Portable EV Chargers 7-14 business days 8-15 business days 15-29 business days
Home Charging Stations 7-14 business days 8-15 business days 15-29 business days
DC Chargers / DC SVC-TG / DC EVC-ZG 7-14 business days 8-15 business days 15-29 business days

Remote Areas & Extended Delivery

Deliveries to remote regions, island destinations, low-frequency carrier zones, or special-route areas may require additional transit time beyond the standard estimate.

Depending on destination access and local logistics availability, shipments may be routed through a combination of air freight, sea freight, and land transport to complete final delivery safely and efficiently.

Logistics & Protection

Global Shipping Protection (Included)

All international orders are automatically insured against loss or damage. We handle claims with transport partners at no extra cost to you.

Multi-Modal Transport

We utilize a combination of Air, Sea, and Land transport networks to ensure secure delivery to your specific address.

Tracking Information

Tracking numbers are generated after handling is complete. Adapters and accessories usually receive tracking within 4-7 business days, while portable chargers, home charging stations, and DC charger orders may require 7-14 business days before tracking becomes active.

Customs & Duties

We handle export paperwork. However, specific local import duties or taxes are the recipient's responsibility.

* Product-specific handling times apply before transit begins.

* Orders placed on weekends or holidays will be processed on the next business day.

* Remote regions, islands, and special-route destinations may require additional transit time.

* During high-volume periods such as Black Friday or New Year, handling and transit may require additional time.

* Neither party shall be liable for delays resulting from force majeure events, including natural disasters, strikes, customs holds, or transport disruption.

Need a status check on your order timeline?

Contact our logistics team if your tracking update is taking longer than the estimated handling window for your product type.

✉ info@chargepapa.com

Will this fit my car?

Please verify your car's port type (Type 1 vs Type 2) before purchasing. If unsure, send a photo of your charging port to our chat support.

View full details